| |
|
|
| |
| |
| |
 |
|
| |
| LO-CHLOR FUME-AWAY |
| |
| Inhibits the corrosive characteristics of hydrochloric acid |
| |
| |
| Available sizes: 1 litre bottle (12 per carton) |
| Formulation details: alkyl phenol ethoxylate (17.5%) which is a non ionic surfactant |
|
|
| |
| |
PROPERTIES |
|
| |
- Fume-away inhibits the corrosive characteristics of hydrochloric acid
- It’s use causes a vast reduction in fuming
- It also contains a detergent that assists greatly in the removal of oils and greases
- It assists in minimizing both streaking and plaster loss
|
 |
| |
|
|
| |
APPLICATION |
|
| |
- Use 330mls of fume-away with 5 litres of hydrochloric acid
- Add two capfuls of Lo-Chlor No Foam to every 5 litres of Hydrochloric Acid used in the Lo-Chlor
Fume-Away / Hydrochloric Acid mixture to prevent foaming of the solution created.
- Once you have created the above solution (Lo-Chlor Fume-Away / Hydrochloric Acid / Lo-Chlor No Foam)
you then dilute it with water at the required rate
- A recommended mix is three parts water to one part of the solution.
- It is recommended to use a mix of two parts water to one part of the solution for a more etching effect
- Be sure that Lo-Chlor Fume-Away has been mixed thoroughly into the dilution.
- IMPORTANT - always add the solution to water, NOT water to the solution
|
|
|
| |
| |
ADVANTAGES OVER OTHER SIMILAR PRODUCTS |
|
| |
- Fume-away saves both time and money by reducing the amount of acid needed to wash a pool
- It reduces fuming
- It cuts through oils and grease
- It promotes more uniform cleaning
- It also delays the corrosion of a range of metal surfaces. These include metal fixtures in the pool, metal drains, and metal enclosures around the pool.
- It is easy to use and economical to purchase
|
|
| |
|
|
| |
EXTRA INSIGHT AND TIPS |
|
| |
- Use an acid brush with a handle
- Work with small areas and hose down in one to five minutes
- After washing each section, flush thoroughly with water
- It is a good idea to have the garden hose close by and water running while you are working
- Wear rubber gloves, boots, and eye protection
- If you get any acid on you, splash with water
- If any gets in eyes, flush eyes thoroughly with water
- Follow all safety guidelines and precautions when working with acid
|
|
| |
|
|
|
| |
|
| |
|
|
|
