Products - Maintenance & Cleaning - Scale Eliminator           LO-CHLOR SCALE ELIMINATOR   Reduces scale build up on pool surfaces   REFERENCE: LC405   Available sizes: 5lt (4 units), 25 lt, 200lt Formulation details: Poly-Acrylate Silicate Ester     PROPERTIES           Reduces the build of scale on swimming pool surfaces. Compatible with all pool and spa chemicals.   APPLICATION RATES           Initial Dose: Use 5 litre per 50,000 litres pool water. Maintenance Dose: Use 1 litre per 50,000 litres pool water every 2 months only if necessary.     POOL VOLUME INITIAL DOSE 30,000 L 3 L 50,000 L 5 L 70,000 L 7 L 100,000 L 10 L       HOT TIPS FOR POOL PROFESSIONALS           Backwash filter before using. Scale in swimming pools may differ from scale seen in other situations. Whilst scale has been well documented as the build up on the pool surface of insoluble salts of calcium and magnesium (carbonates and sulphates), little attention has been given to phosphates. The role of phosphates in swimming pool water is not well understood. Calcium Phosphate scale is very insoluble and difficult to remove. Far better to identify higher phosphate levels and lower the phosphate level before difficult to remove scale forms on the pool surface. Lo-Chlor Chemicals have available free test kits to determine phosphate levels and these should be used at the first sign of scaling. As a guide a phosphate level in excess of 0.2 p.p.m. should be reduced by application of LO-CHLOR STARVER POOL MAINTENANCE. Where the level in the swimming pool exceeds 1.5 p.p.m. then the pool should be flocced first with LO-CHLOR MAXI FLOC and subsequently treated with LO-CHLOR STARVER POOL MAINTENANCE. Once the phosphate level is at an acceptable level (less than 0.2 p.p.m.) then add LO-CHLOR SCALE ELIMINATOR. For persistent scale a maintenance follow up dose of LO-CHLOR SCALE ELIMINATOR is recommended. LO-CHLOR SCALE ELIMINATOR will improve the performance of most salt water chlorinators/