Products - Spa & Hot Tub Treatment - Aquacadabra Pool Sanitiser           LO-CHLOR AQUACADABRA POOL SANITISER   Swimming pool bactericide Does not contain chlorine or bromine Excellent bactericide for use with ionisers   REFERENCE: LC419   Available sizes: 1lt, 2.5lt, 5lt, 25lt Formulation details: Polihexanide Hydrochloride     PROPERTIES       Polihexanide hydrochloride is an effective biocide. Kills and eliminates bacteria from swimming pool water. Alternative to chlorine, bromine and other sanitisers. Use with all ionisers.   APPLICATION RATES       Initial Dose : 60ml per 10,000 litres pool water. Maintenance Dose : 60ml per 10,000 litres pool water weekly.   POOL VOLUME DOSE RATE (WEEKLY) 30,000 L 180 ml 50,000 L 300 ml 75,000 L 450 ml 90,000 L 540 ml 120,000 L 720 ml 150,000 L 900 ml       AUTOMATIC DOSING APPARATUS - PREPARE SOLUTIONS AS FOLLOWS         Lo-Chlor Aquacadabra Pool Sanitiser Solution           Add 2 litres LO-CHLOR AQUACADABRA POOL SANITISER to 18 litres water (final volume 20 litres)           Algaecide Solution (Use one of the following)           LO-CHLOR POOL ALGAECIDE or LO-CHLOR WINTERISER ALGAECIDE – Add 500ml to 19.5 litres water (final volume 20 litres) LO-CHLOR SUMMERCARE ALGAECIDE – Add 1 litre to 19 litres water (final volume 20 litres)           DOSING RATES (BOTH PRODUCTS)           85 ml per 10,000 litres pool water per day       POINTS TO NOTE           Used weekly, LO-CHLOR AQUACADABRA POOL SANITISER controls bacteria in swimming pools. It is an excellent alternative to chlorine and bromine, particularly where odours and allergic reactions present problems to bathers. The product is not an algaecide. The use of a Lo-Chlor maintenance algaecide is strongly recommended. Use of other types of copper based algaecides will reduce the anti-bacterial affect of LO-CHLOR AQUACADABRA POOL SANITISER. Failure to use an algaecide may result in a cloudy, green pool. (SEE TABLE BELOW) Check regularly for the presence of phosphates. If necessary use LO-CHLOR STARVER POOL MAINTENANCE. Prior to first time use, chlorine level must be zero. Use LO-CHLOR CHLORINE REMOVER if required.     LO-CHLOR POOL ALGAECIDE LO-CHLOR WINTERISER ALGAECIDE LO-CHLOR SUMMERCARE ALGAECIDE POOL VOL (LITRES) INITIAL DOSE WEEKLY DOSE INITIAL DOSE WEEKLY DOSE INITIAL DOSE WEEKLY DOSE 30,000 250 ml 45 ml 250 ml 45 ml 600 ml 60 ml 50,000 420 ml 75 ml 420 ml 75 ml 1 L 100 ml 75,000 630 ml 115 ml 630 ml 115 ml 1.5 L 150 ml 90,000 750 ml 135 ml 750 ml 135 ml 1.8 L 180 ml 120,000 1 L 180 ml 1 L 180 ml 2.4 L 240 ml       HOT TIPS FOR POOL PROFESSIONALS           Clean pool first. Brush and vacuum debris. Backwash and clean filter if required. If pool water is green, superchlorinate and then wait until chlorine level drops to zero. Use LO-CHLOR CHLORINE REMOVER if necessary. Never add LO-CHLOR AQUACADABRA POOL SANITISER if chlorine (or bromine) is present in the pool water. For best results pool water pH should be in the range 7.0 to 7.4. When adding both LO-CHLOR AQUACADABRA POOL SANITISER and algaecide , add at opposite ends of the pool. Should pool water turn cloudy, add LO-CHLOR OXYGEN SAFE SHOCK PLUS to the pool. Also add a suitable LO-CHLOR clarifier. Should cloudiness persist check TDS level. If TDS over 1400 ppm, partially empty and then refill pool with fresh water. If within normal limits then superchlorinate pool (note that chlorine level will need to reduce to zero before again adding LO-CHLOR AQUACADABRA POOL SANITISER). Leaf stains are best treated by applying LO-CHLOR OXYGEN SAFE SHOCK PLUS to the pool.